Paul Agnew Aerion Series, Installation, Operating And Maintenance Manual

Page: 63 / 104

58.
FLUEING INFORMATION
The first flue duct section inserted into the heater spigot
with measurements of O.D. 102 mm x 170 mm.
The “socket” end of the flue duct measures O.D. 111 mm x
164 mm.
Line up the locking ends on the male / female flue sections
and insert the male end of the flue into the female end.
Twist to lock. If securing the joints with rivet/s or screw/s do
not penetrate the inner wall of the flue pipe.
Aerion Range
Flue Components for Installing PAD series Gas Space Heaters.
Manufacturer: DuraVent
Flue Component Part Number
Termination cap 46DVA-VCH
900 mm flue length 46DVA-36
600 mm flue length 46DVA-24
300 mm flue length 46DVA-12
150 mm flue length 46DVA-06
90° elbow 46DVA-E90
45° elbow 46DVA-445
The flue is coaxial with the first flue duct section inserted into the heater spigot with this spigot measuring 104mm
(exhaust outlet) and 174 mm (fresh air inlet).
All flue lengths are capable of being inserted into the heater spigot