68.
INSTALLER INFORMATION
Aerion Range
REMOVAL THE INNER SIDE GLASS PANEL
Step 1: move the lower front grill which is located
between the outer/inner glasses.
Step 2: The inner side glass is secured into the
top, side and inner bottom supporting channel
by rope seal. Grip the front edge of the rope and
apply upward motion to remove the rope from the
channel.
Step 3: Apply the glass suction pad (provided) to
the centre of the glass and engage. To protect the
edge of the glass insert a couple of soft cloths into
the cavity before removing the glass panel.
With the glass supported and with an upward
motion lift the top edge of the glass upward into
the top front fascia. When located fully into the top
inner fascia swing the bottom of the glass outward
and downward and rest in the cavity vacant after
the removal of the lower front grill.
Remove the glass and retain in a safe place.
Replace in reverse order. Note ensure the glass
sealing rope is fully engaged into the channel
and ensure the surface where the suction pad
was applied is cleaned to remove any marks or
smears.
Summary of Contents for Aerion Series
