Paul Agnew Aerion Series, Installation, Operating And Maintenance Manual

Page: 72 / 104

67.
INSTALLER INFORMATION
Aerion Range
REMOVAL THE INNER FRONT GLASS PANEL
Step 1: Remove the lower front grill which is
located between the outer/inner glasses.
Step 2: For the GF model remove the Right Hand
and Left Hand glass clamps (oner per side) that
secure the inner glass onto the front of the firebox.
Step 3: The inner glass is secured into the top
glass clamp and inner bottom supporting channel
by rope seal. Grip the RH edge of the rope and
apply downward motion to remove the rope from
the top glass clamp. Repeat the same with the
bottom supporting channel rope with an upward
motion.
Apply the glass suction pad (provided) to the
centre of the glass and engage. To protect the
edge of the glass insert a couple of soft cloths into
the cavity before removing the glass panel.
With the glass supported and with an upward
motion lift the top edge of the glass upward into
the top front fascia. When located fully into the top
inner fascia swing the bottom of the glass outward
and downward and rest in the cavity vacant after
the removal of the lower front grill.
Remove the glass and retain in a safe place.
Replace in reverse order. Note ensure the glass
sealing rope is fully engaged into the channel.