65.
INSTALLER INFORMATION
Aerion Range
OUTER GLASS INSTALLATION
Step 3: With the glass in the
horizontal position. With one
hand holding the glass pad and
the other hand gripping the
centre edge of the glass. Lift and
proceed to locate onto the heater
front. With the glass supported
and with an upward motion
feed the top edge of the glass
under the top front fascia. When
located fully into the top inner
fascia swing the bottom of the
glass into the bottom fascia and
when in alignment, locate into
the bottom supporting channel.
Replace the outer side trim in
reverse order.
Step 4: For models with the side
glass remove the outer rear side
trim. Grip the trim and apply an
upward motion to disengage the
securing tabs from the slots in
the inner trim. When the tabs are
clear of the slots. For model GF3
remove the outer trim both sides.
Apply the glass suction pad
(provided) to the centre of the
glass and engage. With the glass
supported and with an upward
motion feed the top edge of the
glass under the top front fascia.
When located fully into the top
inner fascia swing the bottom of
the glass into the bottom fascia
and when in alignment, locate
into the bottom supporting
channel. Replace the outer side
trim in reverse order.
Summary of Contents for Aerion Series
