34 | P a g e
PATON
®
ADI 200 PAC AC/DC TIG/MMA
13.
TRANSPORT
Packaged equipment may be transported by any means of transport which ensure its safety, in
accordance with the transport rules laid down for the specific means of transport.
14.
SPECIFICATION DATA
ATTENTION
!
If the source is designed for a special power supply voltage,
its technical parameters are indicated on the nameplate on the rear panel. In
this case the power plug, the mains cable must be selected according to the
voltage used.
Nominal network voltage 50/60 Hz,
~230 V
Voltage change intervals
190 – 260
Energy efficiency (at nominal voltage),
>80%
Welding current adjustment ranges
5 – 200 A
TIG DC MMA DC welding current:
5 min / 40%
5 min / 100%
200 A
126 A
TIG AC welding current:
5 min / 50%
5 min / 100%
200 A
140 A
Maximum power consumption
6.3 kVA
Nominal working voltage for MMA wrapped
electrode welding
20,4 – 26,8 V
Nominal working voltage for TIG AC/DC
welding with an insensitive electrode
10,4 – 18 V
15.
DELIVERY SET
1.
Welding unit with a power cable 3 m in length
– 1 pcs;
2.
The welding cable 3 m in length with a
Abicor Binzel MK300
grounding clamp – 1 pcs
3.
Shoulder-carry belt
– 1 pcs;
4.
The quick-release nipple for a gas hose
– 1 pcs;
5.
Cardboard box
„PATON™”
– 1 pcs;
6.
Operation manual
– 1 pcs;
16.
SAFETY REGULATIONS
BACKGROUND INFORMATION
The device may be used only for the purpose for which it was created. The device is intended for use
by persons with appropriate qualifications. It is obligatory for installation, operation, repair to be
carried out by qualified persons. Before installation and operation of this device, please read the
manual carefully. Failure to follow the instructions in the manual may result in serious injury, death
and damage to the unit itself. Improper installation, maintenance and operation resulting in damage to
the unit is not the responsibility of the manufacturer.
Summary of Contents for ADI 200 PAC
Page 1: ......
