17 | P a g e
PATON
®
ADI 200 PAC AC/DC TIG/MMA
Figure 3 Welding cycle ladder - button mode (TIG DC/2T+pulse)
Figure 4 Welding cycle ladder - button mode (TIG DC/4T+pulse)
ATTENTION!!!
To activate pulsed welding mode, change the value of
the lower current
"LOW CURRENT"
from the default setting OFF to
another value, then the light on the "P" display will light up. (pulse mode is
on).
For function value change mode, see section 8.2.
Summary of Contents for ADI 200 PAC
Page 1: ......
