3 | P a g e
PATON
®
ADI 200 PAC AC/DC TIG/MMA
DECLARATION OF CONFORMITY
The following products have been tested by us in accordance with these
standards and are considered to be compliant with the European Community
Low Voltage Directive LVD 2014/35/EU and the EMC Electromagnetic
Compatibility Directive 2014/30/EU.
AN AUTHORISED
REPRESENTATIVE:
MASTERWELD Sp. z o.o., Poland
14 Przemysłowa Street,
35105 Rzeszów
NIP: 8133751525
PRODUCER:
Limited Liability Company “Pilot Plant of Welding
Equipment of Electric Welding Institute named after
E.O. Paton”
Ukraine, 03045, Kiev, Novopyrohivska Street 66
PRODUCT:
DIGITAL INVERTER WELDER TIG
PATON ADI-200P AC/DC TIG/MMA
The declaration is based on a single evaluation of one sample of the above mentioned
products. This does not imply an evaluation of the entire production. The manufacturer shall
ensure that the entire product in serial production complies with the test product specified in
this report. The applicant shall keep the whole technical report at the disposal of all
competent persons.
Applicable Directives:
2014/35/EU LVD (Low Voltage)
2014/30/EU EMC (Electromagnetic Compatibility)
EN 60204-1:2006. Safety of machinery - Electrical equipment of machines -
Part 1: General requirements; EN 60974-1:2012 Arc welding equipment - Part
1: Welding energy sources; EN 60974-10:2014 Arc welding equipment - Part
10: Electromagnetic compatibility (EMC) requirements.
Date of release:
12 September 2017
Expiration date:
11 September 2022
Vice-President of the Management Board
We, MASTERWELD Sp. z o. o., hereby declare that the above requirements comply with the following
European Parliament Directives,
2014/35/EU
Low Voltage (LVD)
of 24 February 2014 and
2014/30/EU
Electromagnetic Compatibility (EMC)
of 26 February 2014.
The above CE marking may be used by the manufacturer under his responsibility, after completion of the
declaration of conformity and compliance with the relevant EU directives.
Summary of Contents for ADI 200 PAC
Page 1: ......
