38 | P a g e
PATON
®
ADI 200 PAC AC/DC TIG/MMA
The seller reserves the right to
refuse warranty service or to specify the start date of warranty as
month and year (according to the serial number) in the following cases if:
1.
The manual has been lost;
2.
The manual has not been completed or has been incorrectly completed by the dealer.
ATTENTION!
The warranty period is extended by the time the device is
repaired at an authorized service center.
ATTENTION!
For
PRO series
welding inverters
3 years basic warranty.
It
is an obligatory condition to perform service within the required time limits in
an authorized service center. The initial maintenance should take place after
24 months.
18.
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT
(
concerns the household)
The symbol shown on the products indicates that the appliance may
not be disposed of in the same way as household waste. The device
must be taken to an electrical equipment disposal point, where it will
be accepted free of charge. Information about such waste equipment
collection points can be found on websites, for example.
Proper disposal will preserve valuable natural resources and avoid
environmental pollution.
Failure to comply with the above recommendations may result in the
imposition of a fine in accordance with applicable regulations
If you wish to dispose of your equipment for disposal, please contact your nearest point of sale or
contact the equipment importer for further information.
IMPORTER/AUTHORISED DISTRIBUTOR
MasterWeld Sp. z o.o.
35-105 Rzeszów ul. Przemysłowa 14
Tel. +48 (22) 290 86 96
All rights reserved. This document is protected by copyright. Reproduction or distribution of the User Manual in whole or
in part without the permission of MasterWeld is prohibited.
Summary of Contents for ADI 200 PAC
Page 1: ......
