32 | P a g e
PATON
®
ADI 200 PAC AC/DC TIG/MMA
9.
PULSE BALANCE
Pulse balance (default 50%)
a)
15% ... 85% ( 1% change step)
10.
PULSE FREQUENCY
Pulse frequency (default 120 Hz)
a)
0,2 ... 500 Hz ( 0.1 Hz step change)
11.
LOW CURRENT
Lower current (pulse mode) (default OFF)
a)
5 ... 195 A ( step 1 A change)
12.
ARC STABILIZER
Arc stabilization (default OFF)
a)
ON/OFF
8.3
WELDING METHOD TIG DC WITH RIV (SPOT) FUNCTION
1.
PRE FLOW
Gas flow time before welding (default 1s)
a)
0,1 ... 1s (shift step 0.1s)
2.
PULSE TIME
Pulse time (default 2s)
a)
0,5 ... 5s (0.1s step)
3.
PEAK CURRENT
Peak current (default 100 A)
a)
5 ... 200 A (shift step 1 A)
4.
FLOW POST
Gas flow time after welding (default 2s)
a)
0,1 ... 2s (shift step 0.1s)
8.4 METHOD OF MMA WELDING
1.
MAIN CURRENT
Basic current (default 100 A)
a)
10 ... 185 A ( shift step 1 A)
2.
PULSE BALANCE
Pulse balance (default 50%)
a)
15% ... 85% ( 1% change step)
3.
PULSE FREQUENCY
Pulse frequency (default 50 Hz)
a)
0,2 ... 500 Hz (shift step 0.1 Hz)
4.
LOW CURRENT
Lower current (pulse mode) OFF by default
a)
5 ... 185 A ( shift step 1 A)
5.
ANTISTICK
Arc stabilization (default ON)
a)
ON/OFF
6.
HOT START
Hot - Start function (default 0)
a)
0 ... 100 (step 1)
7.
ARC FORCE
Arc - Force function (default 0)
a)
0 ... 100 (step 1)
9.
RESETTING ALL FUNCTIONS OF THE CURRENT WELDING
METHOD
To reset all saved programs in all modes to factory settings, turn off the device, press and hold the
"Program" button for 5 seconds, turn on the device.
Summary of Contents for ADI 200 PAC
Page 1: ......
