4 | P a g e
PATON
®
ADI 200 PAC AC/DC TIG/MMA
ATTENTION
!
Connecting to the mains (in t 25ºС), take into account the
existing installation and possible extension!
1.
GENERAL INFORMATION
The PATON
®
ADI 200 PAC
digital inverter rectifier is optimised for
"TIG"
direct or alternating
current
(AC/DC)
inert gas arc welding and manual
"MMA"
direct current arc welding.
The "Professional" series unit has been designed for consumers who require a compact design and an
optimal ratio between portability and functionality of a unit with its full nominal current.
The best solution for DC and AC welding of a wide range of materials: aluminium, aluminium alloys
(TIG AC mode),
parts and materials of steel, non-ferrous metals and copper alloys
(TIG DC mode).
The device can also be used for welding with coated electrodes
(MMA mode).
In addition, the
manufacturer used the
RIV
(SPOT) function in this device. Inverter welding machine
PATON ADI
200РАС
provides excellent non-contact glow, constant and stable electric arc, as well as high quality
of weld and ease of use. The device has
a protection module
against too low and too high supply
voltage. Thanks to the increased frequency of the input voltage, which powers the transformer, it is
several times smaller, so the device has several times smaller weight and dimensions with the same
output parameters compared to other devices with similar characteristics.
Inverter welding machine PATON ADI 200 РАС is designed for arc welding:
-
TIG AC/DC (
direct / alternating current)
-
MMA (
direct current)
-
RIV (
rivet welding mode)
Electrode diameter
in the MMA
method
Fixed current value at
MMA and TIG
Power cable cross-
section, mm2
Maximum cable
length, m
ADI 200 PAC
Ф3
mm
no more than
120 А
1,5
75
2,0
105
2,5
130
4,0
205
6,0
310
Ф4
mm
not more than 160
A
2,0
75
2,5
95
4,0
155
6,0
230
Ф5
mm
up to 200 A
2,5
75
6,0
185
Summary of Contents for ADI 200 PAC
Page 1: ......
