5 | P a g e
PATON
®
ADI 200 PAC AC/DC TIG/MMA
Main advantages of PATON®:
1.
Installed module for
non-contact arc ignition
(initiation of high voltage welding of kV)
HF.
2.
Pulsed current welding function in TIG AC/DC and MMA modes
3.
Possibility to save 10 custom welding settings.
4.
RIV welding function
5.
Push button mode on 2T and 4T handle
6.
All electronic components of the device are impregnated with two layers of high quality
lacquer, which ensures the reliability of the product during its entire lifetime.
7.
On all the elements of the source that heat up during operation, an electronic heat
protection system is installed, when the temperature reaches 100 ˚С, the power supply of
the unit will be switched off for as long as the temperature does not fall.
8.
Infinitely variable welding parameters
9.
Improved arc stabilization in TIG AC/DC modes.
10.
Adaptive temperature-dependent fan speed control.
11.
Despite the protection against voltage surges, a stabilisation system is installed for larger
long-term voltage differences in the single-phase power network from 190 V to 260 V.
12.
The device is equipped with a modern digital interface with LED display, which allows to
fully adjust the device to the welding mode.
1.1
TECHNICAL CHARACTERISTICS
PARAMETERS
ADI 200 PAC
POWER SUPPLY
Rated power supply voltage 50/60 Hz, V
230
Power supply voltage range, V
190 – 260 V
Rated power supply current, A
25 A
Rated welding current, A
200 A
Maximum operating current, A
200 A
BASIC PARAMETERS
Welding current control range, A
5 – 200 А
Basic operating mode
TIG АС/DC
Additional operating mode
RIV, МА
WELDING CURRENT REGULATION LIMITS
MMA mode
5 – 200 А
TIG АС/DC mode
5 – 200 А
Open-circuit voltage in the manual arc welding process, V
65
Efficiency coefficient, %
Not less than 80%
WORKING CYCLE
At welding current 126 (DC)
100%
At welding current 200 (DC)
40%
At welding current 140 А (АС)
100%
At welding current 200 А (АС)
50%
Rated consumed power, kVA
6.3 kVA
Maximum consumed power, kVA
6.3 kVA
Summary of Contents for ADI 200 PAC
Page 1: ......
