manualshive.com logo in svg

Paso PA8506-V, Instructions For Use Manual, Page: 9 / 68

Share
Download
Paso PA8506-V Instructions For Use Manual Download Page 9

5

System Manual | 2014

PA8500-VES | Voice Evacuation System 

UK

PA8506-V 

|

 VES Compact System

4.2  FUNCTIONAL SPECIFICATIONS

.

•. Two-channel.sound.broadcasting.system.

.

•. Six.broadcasting.zones.

.

•. Controlled.double.output.line.for.each.single.(A.and.B).

.

•. *.mp3.files.read.from.USB.flash.memory.as.a.source.of.background.music.

.

•. Downloading.of..*.WAV.files.from.USB.flash.memory.for.emergency.voice.messages.and.chime.

.

•. Independent.5-level.volume.control.of.the.music.for.each.zone.

.

•. Sources.for.service.paging.announcements.settable.to.7.priority.levels.and.36.zone.lists.

.

•. System.operating.functions.linked.to.different.access.levels,.some.of.which.protected.by.passwords

.

•. Continuous.control.and.monitoring.of.the.integrity.of.the.critical.path.(from.the.sources.of.the.emergency.signal.to.the.loudspeaker.lines).

without.interrupting.the.background.music.

.

•. Monitoring.of.the.loudspeaker.lines.(integrity.and.dispersion.to.earth).by.means.of.the.two-channel.amplification.system,.even.in.voice.

emergency.conditions.

.

•. Digital.audio.control.(DSP).

.

•. Easy.and.rapid.configuration.(large.LCD.display).

.

•. Provisions.for.a.web.server.

.

•. Emergency.zone.disabling.function.(Disabling).

.

•. Do.Not.Disturb.function.for.protecting.the.zones.from.accidental.enabling.of.music.or.service.calls.

.

•. Acoustic.signalling.of.failure.status.with.automatic.or.manual.muting.

.

•. Manual.resetting.of.visual.failure.signals.and.automatic.resetting.with.storage.of.the.last.occurring.failure.

.

•. Direct.procedure.for.starting.up.the.system.(start-up).and.programming.events,.without.using.the.management.software..

.

•. Possibility.of.adding.a.250.W.external.amplifier.to.increase.the.output.power.of.the.system.

.

•. Automatic.management.of.the.music.amplifier.as.a.stand-by.for.the.operational.amplifier.(internal.or.external).

.

•. With.a.second.remote.PA8506-V.unit,.the.system.can.be.expanded.to.cover.up.to.12.zones..

.

•. Possibility.of.connecting.up.to.16.paging.units.

.

•. It.is.possible.to.connect.up.to.seven.remote.emergency.units.

4.3  TECHNICAL SPECIFICATIONS

.

•. Two.250.W.RMS.Class.D.amplifiers.

.

•. Built-in.message.generator.for.broadcasting.voice.alarms.on.two.channels.(EVAC.and.ALERT).

.

•. Controlled.emergency.microphone.on.the.front.panel.

.

•. LCD.graphic.display,.128x64.pixels.

.

•. USB.socket.on.front.panel.for.connecting.to.storage.devices.

.

•. USB.socket.on.front.panel.for.connecting.a.PC.

.

•. Auxiliary.line.input.for.an.external.source.of.music.

.

•. Balanced.microphone.input.(IN.1).with.phantom.power.supply.and.precedence.contact.

.

•. Balanced.microphone.or.line.input.(IN.2).with.phantom.power.supply.(MIC),.precedence.contact.or.automatic.VOX.precedence.

.

•..... Balanced.line.input.(IN.3).with.automatic.VOX.precedence.function.

.

•. 8.programmable.and.controlled.input.contacts.

.

•. 6.open-collector.outputs,.programmable.as.system.status.or.override.outputs.for.by-passing.the.attenuators.

.

•. 2.relay.outputs.for.“emergency”.and.“failure”.conditions.

.

•. CAT5.socket.for.remote.emergency.consoles.PMB132-V.and.PMB132/12-V.(EMERGENCY.UNITS).

.

•. CAT5.socket.for.service.call.consoles.PMB106-G./.PMB112-G.range.(PAGING.UNITS).

.

•. CAT5.socket.for.connection.to.a.remote.PA8506-V.unit.(REMOTE.LINK).

.

•. 100-70V.line.input/output.for.connection.to.a.250.W.external.amplifier.for.expansion.purposes...

.

•. Built-in.loudspeaker.for.channel.monitoring.and.acoustic.failure.signalling.(beep).function.

.

•. Input.24.VDC.secondary.emergency.power.supply.

Summary of Contents for PA8506-V





































































Reviews:

No comments