manualshive.com logo in svg

Paso PA8506-V, Instructions For Use Manual, Page: 25 / 68

Share
Download
Paso PA8506-V Instructions For Use Manual Download Page 25

21

System Manual | 2014

PA8500-VES | Voice Evacuation System 

UK

PA8506-V 

|

 VES Compact System

7.   MENU STrUCTUrE

The.

PA8506-V

.enables.access.to.the.system.functions.through.a.set.of.Management.Panels,.grouped.according.to.operational.typologies.and.

intended.uses.into.Option.Menus.accessible.from.the.Main.Page..Furthermore,.the.following.Option.Menus.were.assigned.to.different.levels.

of.access,.with.reference.to.the.various.different.circumstances.requiring.different.degrees.of.skill.on.the.part.of.the.personnel.and.different.

levels.of.authorisation.
•.<.

MUSIC

.>.Menu

Default.window.for.using.the.system.in.normal.Quiescent.Conditions..It.enables.control.of.the.BGM.sources.and.adjustment.of.the.volumes.of.

the.music.section..This.menu.is.not.accessible.during.a.Voice.Alarm.Condition..At.this.basic.level,.the.RESET,.ALERT.and.EVAC.keys.are.not.

operational.
•.<.

AUdIO SETTING

.>.Menu

Group.of.basic.options.for.standard.operating.conditions..It.is.intended.for.users.for.setting.and.adjusting.the.PA.sources..At.this.basic.level,.the.

RESET,.ALERT.and.EVAC.keys.are.not.operational.
•.<.

INSPECTION

.>.Menu..

First.access.level,.for.investigating.the.status.of.the.system..It.is.intended.for.the.personnel.responsible.for.initial.checking.of.the.causes.leading.

to.a.failure.or.emergency.condition..At.this.initial.access.level,.the.RESET.key.has.the.function.of.resetting.the.buzzer.signalling.a.FAULT..At.

this.basic.level,.the.ALERT.and.EVAC.keys.are.not.operational.
•.<.

OPErATOr 

>.Menu

Second.access.level.for.trained.personnel,.authorised.to.manage.the.system.in.emergency,.failure.and.disablement.conditions..A.password.for.

accessing.this.level.can.be.added.
•.<.

CONFIGUrATION 

>.Menu

Third.access.level,.for.trained.personnel.authorised.to.use.the.advanced.functions.of.the.system.and.to.alter.the.configuration.parameters,.for.

starting.up.and.altering.the.system..A.password.for.accessing.this.level.can.be.added.
•.<.

SErVICE

.>.Menu

Fourth.access.level,.included.among.the.options.of.the.CONFIGURATION.Menu,.for.servicing.activities,.up-dating.of.firmware.and.altering.the.

operating.parameters.of.the.PA8506-V.system..Use.is.permitted.only.for.technical.personnel.having.the.necessary.access.key.
•.<.

EMErGENCy

.>.Menu

Operational.environment.for.managing.Manual.Emergencies,.with.top.priority..Accessible.at.all.times.using.the.dedicated.“Emergency”.key,.it.

may.be.used.only.by.authorised.personnel.trained.with.regard.to.the.Emergency.and.Evacuation.Plan.(EEP).
The.functions.associated.with.levels.featuring.restricted.access,.for.which.a.password.may.be.set,.are.highlighted.by.the.symbol....

PA8506-V

Loading...

7.1 

“HOME” FUNCTIONS - ACCESS TO THE OPTION MENUS

7.1.1  

Basic Level - MUSIC menu

After switching on the system, the software loading window will appear, followed by the panel for managing the Music Menu. To access the MAIN 

PAGE, press the MENU key. From the MAIN PAGE it will be possible to select the various different Option Menus for the advanced functions of the 

system and, by means of the MENU key, to access the MONITOR management panel. From the MAIN page, press ESC to return to the MUSIC 

management panel. 

MENU

ESC

OK 

MENU

MENU

OK

Summary of Contents for PA8506-V





































































Reviews:

No comments