manualshive.com logo in svg

Paso PA8506-V, Instructions For Use Manual, Page: 19 / 68

Share
Download
Paso PA8506-V Instructions For Use Manual Download Page 19

15

System Manual | 2014

PA8500-VES | Voice Evacuation System 

UK

PA8506-V 

|

 VES Compact System

6.1.2  Glossary

Following.is.a.list.of.definitions.of.terms.used.in.this.manual,.completed.by.indications.of.a.general.nature.

“BGM Source”

:.

One.of.the.following.audio.sources.using.the.“Music”.amplification.channel.(BackGround.Music):

-. Audio.source.connected.to.the.AUX.input.

-. Flash.memory.device.containing.*.mp3.files.plugged.into.to.the.front-panel.USB.EXT.socket.

-. Sorgente.audio.collegata.all’ingresso.IN.1.(Microfonico).con.modalità.impostata.MODE:.IN.OFF.

-. Sorgente.audio.collegata.all’ingresso.IN.2.(Microfonico.oppure.di.Linea).con.modalità.impostata.MODE:.IN.OFF..

-. One.of.the.BGM.sources.mentioned.above.(USB-AUX-IN.1-IN.2).connected.to.and.selected.for.the.remote.PA8506-V.unit,.and.available.on.

the.local.PA8506-V.unit.via.the.REMOTE.LINK.

During.a.“Voice.Alarm.Condition”,.the.BGM.sources.are.not.operational.

“PA Source”

:.

One.of.the.following.audio.sources.using.the.”Voice”.amplification.channel.for.Public.Address.announcements:

-. Source.of.sound.connected.to.the.IN.1.input.(Microphone.input),.set.in.the.ON.or.PRECEDENCE.MODES.

-. Source.of.sound.to.the.IN.2.input.(Microphone.or.Line.input),.set.in.the.ON,.VOX.or.PRECEDENCE.MODES.

-. Source.of.sound.connected.to.the.IN.3.input.(Line),.set.in.the.ON.or.VOX.MODE.

-. EMERGENCY.UNIT.in.the.broadcasting.mode,.PAGING.UNIT.

-. One.of.the.above.PA.sources.(PAGING.UNIT.or.EMERGENCY.UNIT).connected.to.the.remote.PA8506-V.unit.and.active.on.the.local.PA8506-

V.unit.via.the.REMOTE.LINK.

During.a.“Voice.Alarm.Condition”.the.PA.sources.are.not.operational.

“VES Source”

:

One. of. the. following. audio. sources,. using. the. “Voice”. and/or. “Music”. channels. for. emergency. voice. announcements. (Voice. Evacuation.

System):..

-. Pre-recorded.Alert.message.(ALERT).

-. Pre-recorded.Evacuation.message.(EVAC).

-. Emergency.Microphone.(P.T.T.).connected.to.the.front-panel.MICROPHONE.socket.

-. Emergency.microphone.station.connected.to.the.rear-panel.EMERGENCY.UNITS.socket.

-. One.of.the.VES.sources.indicated.above.(ALERT-.EVAC.–.PTT.–.EMERG..UNITS).connected.to.the.remote.PA8506-V.unit.and.active.on.

the.local.PA8506-V.unit.via.the.REMOTE.LINK.

Activation.of.a.“VES.source”.generates.an.operational.“Voice.Alarm.Condition”..

“Voice channel”

:

Amplification.channel.of.the.PA8506-V.system.using.the.internal.Voice.amplifier.and.the.additional.external.amplifier..

-. During.a.“Quiescent.condition”.it.is.used.by.the.“PA.sources”.

-. During.a.“Voice.Alarm.Condition”.it.is.used.by.the.Emergency.Microphone.or.to.play.out.the.pre-recorded.Evacuation.Message.(EVAC).

“Music Channel”

:

Amplification.channel.of.the.PA8506-V.system.that.uses.the.internal.Music.amplifier..

-. During.a.“Quiescent.condition”.it.is.used.by.the.“sources.of.BGM”.

-. During.a.“Voice.Alarm.Condition”.it.is.used.to.play.out.the.pre-recorded.Alert.message.(ALERT).

“Priority”

:

Use.of.the.output.zones.by.an.audio.signal.or.by.a.reset.command.is.governed.in.the.hierarchy.by.the.level.of.priority.assigned.to.each.active.

source..A.current.activation.of.a.zone.can.be.interrupted.only.by.another.with.a.higher.priority.

The PA8506-V system manages priorities as shown in the following tables:

Priority

System 

condition

Operating 

enviroment

Priority 

level

Active 

source

For setting see 

MENU

high

low

“

Voice alarm 

condition

”

Manual.

Emergency

15

PA8506-V.with.emergency.microphone

Fixed.setting

from.8.to.14 Emergency.microphone.stations

See.the.manual.of.the.PMB132-V,.PMB132/12-V

Automatic.

Emergency

7

CONTROL.INPUT.for.RESET.function

Fixed.setting

6

CONTROL.INPUT.for.EVAC.message.

Fixed.setting

5

CONTROL.INPUT.for.ALERT.message.

Fixed.setting

high

 

low

“

Quiescent 

condition

”

PA.

Source

from.8.to.14 Emergency.units.in.broadcast.mode

See.Emergency.units.manual

from.1.to.7

Inputs IN 1 - IN 2 - IN 3 with the PRECEDENCE 

or VOX functions

See.AUDIO.SETTING.section

PAGING.UNITS..Microphone.stations

See.the.manual.of.PMB106-G.and.PMB112-G.

BGM.

Source

0

Music.source

Fixed.setting

The active sources in the “Voice Alarm” condition always have priority over those active in “Quiescent” condition, regardless of the priority level set.

Summary of Contents for PA8506-V





































































Reviews:

No comments