manualshive.com logo in svg

Paso PA8506-V, Instructions For Use Manual, Page: 5 / 68

Share
Download
Paso PA8506-V Instructions For Use Manual Download Page 5

1

System Manual | 2014

PA8500-VES | Voice Evacuation System 

UK

PA8506-V 

|

 VES Compact System

1.  INTrOdUCTION

The.

PA8506-V

.is.an.integrated.Voice.Evacuation.System.enabling.background.music.and.calls.to.be.broadcast.(All.Call.or.to.specific.zones).without.

interfering.with.diagnostic.routines..

This system was designed for ease of installation and for operating in a vast range of applications 

in which both voice emergency systems and sound-broadcasting systems are required, as well as in compliance with the applicable 

safety standards (EN54-16)

..IThe.PA8506-V.integrated.Voice.Evacuation.System.includes.an.emergency.microphone,.two.Class.D.amplifiers,.

a.message.generator.and.a.socket.with.an.USB.input.for.playing.out.background.music..It.also.has.6.zone.outputs.with.the.function.of.continuous.

monitoring.of.the.loudspeaker.lines.(the.number.of.zones.can.easily.be.increased.to.as.many.as.12,.using.a.second.unit.as.a.

slave

).

2. 

NUMBErEd rEFErENCES

2.1  FrONT PANEL

F1..

Flush-mounted.push-button.for.activating.the.Manual.Emergency.mode.

F2.. Hand-held.microphone.with.a.Push-to-Talk.(PTT).key.for.live.emergency.announcements.

F3.. Backlit.black-and-white.graphic.display,.128.x.64.pixels.

2.2  rEAr PANEL

R1.. ON/OFF.switch.
R2.. Terminals.for.24.VDC.external.power.supply.
R3.. Audio.signal.output.for.the.monitoring./.beep.loudspeaker.
R4.. Audio.signal.output.for.external.amplifier..
R5.. Input.for.connecting.remote.emergency.microphone.stations..
R6.. Output.for.connecting.another.remote.PA8506-V.unit.
R7.. Input.for.connecting.paging.microphone.stations.(PMB106-G,.PMB112-G).for.broadcasting.service.functions.
R8.. Balanced.input.for.external.line.source.
R9.. Socket.for.connecting.a.Local.Area.Network.with.TCP/IP.protocol.for.an.Ethernet.10/100.network.
R10.. Balanced.input.for.a.microphone.or.an.external.source./.Terminal.strip.for.connecting.the.precedence.contact.
R11.. Input.for.external.microphone.
R12.. Input.for.connecting.an.external.source.of.music.
R13.. Plug.for.230.VAC.mains.power.supply,.with.built-in.fuse.
R14.. Frame.earthing.connection..
R15.. Fuse.for.24.VDC.external.power.supply..
R16.. 2.relay.outputs.for.signalling.towards.external.peripheral.units..
R17.. Input.socket.for.connecting.the.external.amplifier.
R18.. Power.outputs.for.loudspeaker.lines.
R19.. 8.logical.inputs.with.monitoring.for.control.from.external.peripheral.units.
R20.. 6.“open.collector”.outputs.for.driving.external.relays.for.generic.peripheral.units.

2.3  CONTrOL PANEL

C1.. Monitoring/buzzer.loudspeaker.
C2.. Key.for.manually.resetting.of.pre-recorded.emergency.messages.in.a.Manual.Emergency.context.
C3.. Key.for.sending.a.pre-recorded.Alert.message.by.hand,.operational.in.a.Manual.Emergency.context.
C4.. Key.for.sending.a.pre-recorded.Evacuation.message.by.hand,.operational.in.a.Manual.Emergency.context.
C5.. Multi-purpose.key.for.access.to.the.main.page,.for.navigating.among.the.menus.and.for.specific.submenu.functions.on.the.display.
C6.. Multi-purpose.key.for.confirming.selections,.for.navigating.among.the.menus.and.for.specific.functions.of.the.submenus.on.the.display.
C7..

Multi-purpose.key.for.returning.to.the.Music.Menu,.for.navigating.among.the.menus.and.for.specific.functions.of.the.submenus.on.the.displays.

C8.. Multi-purpose.numerical.keys,.operational.in.every.system.context.
C9.. Status.indicators:
.

•.ALARM.LED.(red):.for.signalling.an.on-going.emergency.condition.(VOICE.ALARM).

.

•.FAULT.LED.(yellow):.for.signalling.an.on-going.generic.failure.condition.(FAULT).

.

•.DIS.LED.(yellow):.for.signalling.activation.of.the.condition.of.disabling.of.the.emergency.zones.(DISABLING).

.

•.SYS.LED.(yellow):.for.signalling.an.on-going.system.fault.condition.(System.CPU.Fault).

.

•.BATT.LED.(green):.for.signalling.the.24.VDC.auxiliary.power.supply.

.

•.ON.LED.(green):.for.signalling.that.the.PA8506-V.system.is.switched.on.and.operational.

C10.. Multipurpose.rotary.switch.for.selection.and.adjustment.functions.
C11.. Type.A.powered.USB.socket.for.connecting.external.flash.memories.
C12.. Type.B.USB.socket.for.connecting.the.PC.for.managing.the.system,.so.as.to.use.the.system.software.(provisions).

Summary of Contents for PA8506-V





































































Reviews:

No comments