Certification
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
Page
C-17
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
Certificates
890
S
YSTEM
EC
D
ECLARATIONS OF
C
ONFORMITY
Date CE marked first applied: October 2004
EMC Directive
Low Voltage Directive
In accordance with the EEC Directive 89/336/EEC and amended by 92/31/EEC
and 93/68/EEC, Article 10 and Annex 1, (EMC DIRECTIVE)
We Parker SSD Drives, address as below, declare under our sole responsibility
that the above Electronic Products when installed and operated with reference to
the instructions in the Product Manual (provided with each piece of equipment)
is in accordance with the relevant clauses from the following standards:-
BSEN61800-3 (1997) incorporating Amendment Number 1 – 2nd environment
BSEN61800-3 (1997) incorporating Amendment Number 1 – 1st environment
1
BSEN61000-6-1:2001; BSEN61000-6-2:2001; BSEN 61000-6-4:2001
1
In accordance with the EEC Directive 73/23/EEC
and amended by 93/68/EEC,
Article 13 and Annex III, (LOW VOLTAGE DIRECTIVE)
We Parker SSD Drives, address as below, declare under our sole responsibility
that the above Electronic Products when installed and operated with reference to
the instructions in the Product Manual (provided with each piece of equipment),
is in accordance with the following standard :-
EN50178 (1998)
M
ANUFACTURERS
D
ECLARATIONS
EMC
D
ECLARATION
M
ACHINERY
D
IRECTIVE
We Parker SSD Drives, address as below, declare under our sole responsibility
that the above Electronic Products when installed and operated with reference to
the instructions in the Product Manual (provided with each piece of equipment)
is in accordance with the relevant clauses from the following standards:-
BSEN61800-3 (1997) incorporating Amendment No1 – 2nd environment
BSEN61800-3 (1997) incorporating Amendment No1 – 1st environment
1
BSEN61000-6-1:2001; BSEN61000-6-2:2001; BSEN 61000-6-4:2001
1
The above Electronic Products are components to be incorporated into
machinery and may not be operated alone.
The complete machinery or installation using this equipment may only be put
into service when the safety considerations of the Directive 89/392/EEC are fully
adhered to.
Particular reference should be made to EN60204-1
(Safety of Machinery - Electrical Equipment of Machines).
All instructions, warnings and safety information of the Product Manual must be
adhered to.
Dr Martin Payn
(Conformance Officer)
PARKER SSD DRIVES LTD.
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44 (0) 1903 737000, FAX: +44 (0) 1903 737100
Registered Number 1159876 England. Registered Office: New Courtwick Lane, Littlehampton, West Sussex BN17 7RZ
1 Radiated emission limit achieved when equipment installed in an EMC cubicle providing 10dBµV attenuation to signals in the range 30MHz to 100MHz
Conducted emission limits achieved when approved external EMC filter installed
.
