The Keypad
Page
8-28
890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
11
A
B
C
D
1
2
3
4
5
6
7
E
Changing the Product Code (3-button reset)
On rare occasions it may be necessary to change the default settings by changing the Product Code. The
Product Code is
detailed in Appendix E.
A special key combination is required to change the product code. This feature is only available at power-
up as a security measure.
The 3-button reset will take you to the POWER BOARD menu in the expanded SYSTEM menu
(highlighted in the diagrams below).
Note
If the unit is operating on 24V dc only for configuration purposes, the unit will trip on
UNDERVOLTAGE (DCLO) as to be expected. Press the "E" key to clear the trip message when it
appears.
6511 Keypad Combination
IMPORTANT
We recommend
the menus marked
*
above are only
used by Parker
SSD Drives or
suitably qualified
personnel.
Note
The LANGUAGE
menu currently
contains selection
for ENGLISH
only.
Hold down the keys opposite:
-
Power-up the drive, continue
to hold for at least 2 seconds
t
E
HOLD
for example
E
Select from the
expanded SYSTEM menu
see
diagram
below
M
*
*
*
