Parallax ELEV-8 V2, Assembly Manual

Page: 83 / 130

8. Plug your USB mini cable into the USB port on your HoverflyOPEN board and plug the
other end into your computer. The board will beep periodically and the LED will flash.
9. Click "Next" on the bottom of the Hoverfly Update Client window and read and agree to
the Hoverfly License Agreement. Then click "Next".
10. On the drop-down list under "Board" select "HF Open". Then click "Next".
11. On the drop-down list under "Mode" select "X". Then click "Next".
12. Now make sure the HoverflyOPEN board is connected to your computer (this should not
take more than 30 seconds). If it does not connect, you may need to download more
current drivers using the link provided. Note: your board will not match the picture
provided. Then click "Next".
13. On the drop-down list under "Software Version" select "2.0". Then click "Flash".
14. Once the flash has finished and the "Flash Log" reads "Success", you may disconnect
your board from your computer and exit the Hoverfly Update Client.
15. Return the HoverflyOPEN to its ESD-safe bag.
Copyright © Parallax Inc. ELEV-8 V2 Assembly Guide
07/26/2018