Parallax ELEV-8 V2, Assembly Manual

Page: 75 / 130

Instructions for Spektrum DX7 Configuration
1. Press the roller while turning on the transmitter. When “System Setup” appears, release
the roller.
2. (Optional) If you wish to disable or alter the transmitter sounds, scroll right until “System
Settings” is highlighted and click once. Scroll right until “Next” is highlighted and click
once. Scroll right until the “Select” next to “Volume Controls” is highlighted, and click
again. Use the scroller to select the volume setting and the adjust them as you desire.
To return to the “System Setup” menu, scroll left to “List” and click once, then click again.
3. Rotate the roller to “Model Select” and click once. Scroll to the first unused model and
click once. When prompted “do you want to create a new model”, select “Create”.
4. Rotate the roller to “Model Type” and click once. Select “Acro” by rotating the roller to
highlight it and click once. When prompted "Data will be reset", select "Yes".
5. Scroll to “Model Name” and click once. Use the roller to name your model (we suggest
“ELEV-8 V2”); scroll until the cursor is under the character you wish to edit, then click
once; scroll until the character you want appears, then click again to save. Scroll to move
the cursor to the next character and repeat. Once done, scroll to "Back" in the
upper-right corner and click.
6. Scroll to "Main" in the upper-right hand corner and click once.
7. With the transmitter powered on and in the main screen, press and release the roller to
enter the “Function List.” Rotate the roller to the right until “Servo Setup” is highlighted
and click once.
8. Scroll right until a flashing box appears above "AIL" then click again. Scroll left until "50
50" is displayed in the flashing box, then click again.
9. Scroll right until a flashing box appears above "ELE" then click again. Scroll left until "50
50" is displayed in the flashing box, then click again.
10. Scroll right until a flashing box appears above "GER" then click again. Scroll left until
"25" is displayed in the flashing box, then click again. Locate the "A" switch on the top
left of the unit and switch it. The highlight box on screen should now highlight the other
"100", click once. Scroll left until "25" is displayed in the flashing box, then click again.
Set the "Gear" switch to the "0" position. You will need to keep this switch in the “0”
position for normal flight operation.
11. Scroll left until “List” is highlighted, then click. Scroll left until “Main” is highlighted, and
click again. Your DX7 transmitter should now be fully configured.
Instructions for Spektrum DX8 Configuration
1. Press the roller while turning on the transmitter. When “Setup List” appears, release the
roller.
2. Rotate the roller to “Model Select” and click once. Scroll to the first unused model and
click once. (Note: unfortunately, there is no way to disable the beeping noise the
transmitter makes every time you scroll or click).
Copyright © Parallax Inc. ELEV-8 V2 Assembly Guide
07/26/2018