Parallax ELEV-8 V2, Assembly Manual

Page: 26 / 130

13. Set the connector on a firm surface (the floor, preferably concrete), and hold in place
with pliers. ​ Do not hold the housing with your hands ​ , or you may accidentally stab
yourself. Push the bullet connector into the plastic housing with a small flat head
screwdriver and strong pressure (a hammer may be carefully used). You will feel (and
may hear) a “pop” when the bullet connector is properly locked into the plastic housing,
and should appear as shown below.
14. Repeat steps 8 through 13 to solder another "male" bullet connector onto the other lead
of your Power Breakout cable.
Copyright © Parallax Inc. ELEV-8 V2 Assembly Guide
07/26/2018