Parallax ELEV-8 V2, Assembly Manual

Page: 78 / 130

Instructions for Binding a ORX T-SIX Transmitter and ORX(R620) Receiver
1. Insert an ESC into the “THRO” jack of your receiver. Make sure to orient the “-”(black
wire) toward the flat side of the receiver (side with ORX sticker).
2. Insert the the bind plug into the “Batt/Bind” jack. The bind plug does not require a
specific orientation.
3. Connect your ELEV 8 LiPo battery. At this time your receiver's status LED will flash
continuously.
4. Make sure your your throttle stick is all the way down, then turn ON your transmitter. At
this time your transmitter and receiver will automatically initiate the binding process.
5. Once the status LED stops flashing, binding is complete.
6. Unplug your battery, remove the ESC, and binding plug.
Copyright © Parallax Inc. ELEV-8 V2 Assembly Guide
07/26/2018