Parallax ELEV-8 V2, Assembly Manual

Page: 103 / 130

Step 30: Mount FC Assembly to Top Chassis Plate
Important!
​
If you have the ELEV-8 V2 No Flight Controller kit (#80202): the directions in
Section 7 are specifically meant for installing and connecting the HoverFly OPEN control board
only ​ . Use caution if attempting to adapt some or all of these directions for any other control
board. Parallax accepts no liability for the use of these directions with components not sold or
provided by Parallax for your specific kit.
Now you will mount the HoverflyOPEN Flight Controller assembly and the Flight Controller
Cover Plate to the ELEV-8 assembly.
Tools Needed
● #1 Philips Head Screwdriver
Parts Needed
● 4 – Machine Screw, #4-40 x 1" (#710-00002)(#1 in the assembly drawing below)
● 1 – Flight Controller Cover Plate (#721-80010)(#2 in the assembly drawing below)
● 4 – Aluminum Spacer, #4 x 1/2" (#713-00007) (#3 in the assembly drawing below)
● HoverflyOPEN Flight Controller assembly, prepared in Step 29 (#4 in the assembly
drawing below)
● ELEV-8 assembly, prepared in Step 27 (#5 in the assembly drawing below)
Copyright © Parallax Inc. ELEV-8 V2 Assembly Guide
07/26/2018