Parallax ELEV-8 V2, Assembly Manual

Page: 54 / 130

Step 15: Attach Motor Mount and Landing Gear to Booms
In the final step of Boom assembly, you will be fastening the Motor Mounts to the Booms and
attaching one side of the Landing Gear.
Tools Needed
● #1 Philips Head Screwdriver
● 1/4” Wrench, 1/4” Socket, or Adjustable Wrench
Parts Needed
● 4 – Boom and Motor Mount w/ Motor Assembly, prepared in Step 14
● 8 – Locknut, #4-40 (#700-00024)
● 4 – Machine Screw, #4-40 x 1" (#710-00002)
● 4 – Machine Screw, #4-40 x 1 1/4” (#710-00042)
● 4 – Landing Gear (#721-80007)
Instructions
1. Slide the Motor Mount over the Boom, aligning the two holes in the Motor Mount with
those in the Boom.
2. Insert the 1” screw through the hole closest to the Motor. Insert the 1 1/4” screw through
the hole farthest from the motor. If you feel any resistance trying to push the screw
through, STOP. You are likely hitting the wires running through the Boom; “jiggle” things
around or carefully twist the screw a couple of times until you can feed it all the way
through with ease.
Copyright © Parallax Inc. ELEV-8 V2 Assembly Guide
07/26/2018