Paradyne FrameSaver SLV 9664, User Manual

Page: 119 / 240

Operation and Maintenance
5-25
9664-A2-GB20-00 March 2000
Table 5-12. Service Level Verification Performance Statistics (2 of 2)
Statistic What It Indicates
Inbound Dropped
Characters Total number of bytes transmitted by the far-end device that
were dropped in transit.
The counts continue to increment until the maximum value is
reached (2
32
–2), then the count starts over.
The SLV Delivery Ratio option (see Table 3-2, Service Level
Verification Options) must be enabled for these statistics to
appear.
H
Above CIR
H
The number of bytes transmitted by the far-end device that
were above the committed information rate and were
dropped in transit.
H
Within CIR
H
The number of bytes transmitted by the far-end device that
were within within the committed information rate, but were
dropped in transit.
H
Between CIR&EIR
H
The number of bytes transmitted by the far-end device that
were between the committed information rate and excess
information rate, and were dropped in transit.
H
Above EIR
H
The number of bytes transmitted by the far-end device that
were above the excess information rate and were dropped
in transit.
Latest RdTrip Latency Current round trip latency, measured in milliseconds, between
the FrameSaver unit and the device at the other end of the
multiplexed DLCI connection.
Unknown
appears if communication with the far-end device is
not successful.
Avg RdTrip Latency Average round trip latency, measured in milliseconds, between
the FrameSaver unit and the device at the other end of the
multiplexed DLCI connection.
Average round trip latency is measured every SLV sampling
interval and the average is computed (using packets with the
configured
SLV Packet Size (bytes) , Table 3-2, Service Level
Verification Options) over the previous 15-minute period. If
SLV Packet Size is changed, a new average is not available
until a new sample has been received.
Unknown
appears if communication with the far-end device
over the last 15 minutes has not been successful.
Max RdTrip Latency Same as average (Avg RdTrip Latency), but storing the
maximum value of latency over the previous 15-minute
interval.
Unknown
appears if communication with the far-end device
over the last 15 minutes has not been successful.