Paradyne FrameSaver SLV 9664 User Manual Download Page 159

Page: 159 / 240

Setting Up NetScout Manager Plus for FrameSaver Devices

8-7

9664-A2-GB20-00

March 2000

3. To add a FrameSaver SLV-supported domain or correct property settings,

select the Edit... button (to the right of the Domain section of the Property
Editor window). The Edit Domain window opens.

4. Click on the domain from the Domains list and configure the following:

Property

Description

Setting

Groups

Stats (S)

Statistics collection

Enabled for all domains.

Hosts (H)

Level 3 information
(network)

Enabled for IP domain only.
Disabled for all other
domains.

Conversations (C)

Protocols being used

Disabled for all domains.

Logging

Event logging

Disabled for all domains and
groups.

5. Select the OK button (at the bottom of the screen) to apply the changes.

Refer to

Configuring Domains in Properties Files in the NetScout Manager/Plus &

NetScout Server Administrator Guide for additional information.

Summary of Contents for FrameSaver SLV 9664











































































































































































































































Search results

Summary of Contents for FrameSaver SLV 9664

Reviews:

Related manuals for FrameSaver SLV 9664

Brands by name

Popular brands

Paradyne FrameSaver SLV 9664, User Manual

Search results

Summary of Contents for FrameSaver SLV 9664

Reviews:

Related manuals for FrameSaver SLV 9664

Brands by name

Popular brands