manualshive.com logo in svg

Paradyne FrameSaver SLV 9664, User Manual

The Paradyne FrameSaver SLV 9664 User Manual is your comprehensive guide to effectively operating this powerful device. Obtain your free copy by easily downloading it from our website, ensuring you have all the necessary instructions at your fingertips. Empower yourself with the knowledge required to maximize the potential of your equipment.

Share
Download
background image

Configuration

 3-42

9664-A2-GB20-00

March 2000

Table 3-12.

Telnet and FTP Session Options (3 of 3)

FTP Login Required

Possible Settings: Enable, Disable
Default Setting: Disable

Specifies whether a login ID and password are required for an FTP session. If required,
the login used is the same login used for a menu-driven user interface session. This
option does not affect the TS Management Link.

Enable – User is prompted for a login ID and password.

Disable – No login is required for an FTP session.

FTP Max Receive Rate (kbps)

Possible Settings:  1 – 128
Default Setting: 128

Sets the maximum receive rate of file transfer to the system. This option allows new
software and configuration files to be downloaded using selected bandwidth without
interfering with normal operation. Using this option, new software and configuration files
can be downloaded quickly using the default settings, or at a slower rate over an
extended period of time by selecting a slower speed. Based upon TCP flow control, the
FTP server in the system throttles bandwidth to match this setting.

1 – 

maximum receive rate – Sets the download line speed from 1 kilobits per second to

the maximum management speed.

Summary of Contents for FrameSaver SLV 9664

















































































































































































































































Reviews:

No comments

Related manuals for FrameSaver SLV 9664

D-Link DSL-2750U Setup preview
DSL-2750U
Brand: D-Link Pages: 14
D-Link DVG-7022S Quick Installation Manual preview
DVG-7022S
Brand: D-Link Pages: 7
D-Link DIR-878 Quick Installation Manual preview
DIR-878
Brand: D-Link Pages: 41
IBM CFFh Installation Manual preview
CFFh
Brand: IBM Pages: 34
Airlink101 AWMB100 User Manual preview
AWMB100
Brand: Airlink101 Pages: 46
Hama 00176547 Operating Instruction preview
00176547
Brand: Hama Pages: 25
Infoblox Infoblox-250 Installation Manual preview
Infoblox-250
Brand: Infoblox Pages: 16
Xantech RT1610 Installation Instructions Manual preview
RT1610
Brand: Xantech Pages: 6
National Instruments Monochrome Image Acquisition Device NI 1410 User Manual preview
Monochrome Image Acquisition Device NI 1410
Brand: National Instruments Pages: 34
Williams Sound DW SY 1 User Manual preview
DW SY 1
Brand: Williams Sound Pages: 2
M86 Security Web Filter HL User Manual preview
Web Filter HL
Brand: M86 Security Pages: 512
COMBA TB-1800 Equipment Manual preview
TB-1800
Brand: COMBA Pages: 57
H3C SR8800-F Installation Manual preview
SR8800-F
Brand: H3C Pages: 148
Tenda W268R User Manual preview
W268R
Brand: Tenda Pages: 74
Tripp Lite N304-15M Specification Sheet preview
N304-15M
Brand: Tripp Lite Pages: 2
Tripp Lite N304-11M Specification Sheet preview
N304-11M
Brand: Tripp Lite Pages: 2
B&B Electronics EIR508-2-T Series User Manual preview
EIR508-2-T Series
Brand: B&B Electronics Pages: 71
Swegon Connect Installation Manual preview
Connect
Brand: Swegon Pages: 4

Brands by name

Popular brands

Load more brands