Paradyne FrameSaver SLV 9664 User Manual Download Page 158

Page: 158 / 240

Setting Up NetScout Manager Plus for FrameSaver Devices

8-6

9664-A2-GB20-00

March 2000

Correcting Domains and Groups

Properties need to be edited when not using the Paradyne-provided file and
when:

An unsupported domain needs to be deleted.

A missing domain needs to be added.

Groups, Samples, Interval, and Logging are not configured as specified in
Step 3 of

Verifying Domains and Groups

Procedure

1. Select the the Property... button (down the center of the Configuration

Manager main window). The Property Editor window opens.

2. To delete an unsupported domain, click on the domain from the Domains list,

then select the Delete button.

The

Are you sure?

prompt appears. Select Yes. The unsupported domain

disappears from the list.

Summary of Contents for FrameSaver SLV 9664











































































































































































































































Search results

Summary of Contents for FrameSaver SLV 9664

Reviews:

Related manuals for FrameSaver SLV 9664

Brands by name

Popular brands

Paradyne FrameSaver SLV 9664, User Manual

Search results

Summary of Contents for FrameSaver SLV 9664

Reviews:

Related manuals for FrameSaver SLV 9664

Brands by name

Popular brands