Paradyne FrameSaver SLV 9664 User Manual Download Page 115

Page: 115 / 240

Operation and Maintenance

5-21

9664-A2-GB20-00

March 2000

Table 5-11.

Network Interface Status (2 of 2)

Field

What It Indicates

Status

Receive Signal

Shows the signals being received
on the leased line BRI S/T network
interface from the attached
DSU(NT1).

INFO0

No Signal Indication. No signal is
present, or a continuous flow of
binary ones is being received.

INFO2

Frames with all B-channel bits
and unused bit positions set to
binary zero are being received.
N and L bits are set according
to normal coding rules. The
activation bit (Bit A) is set to
binary zero.

INFO4

Frames with operational data are
being received. The activation bit
(Bit A) is set to binary one.

Summary of Contents for FrameSaver SLV 9664











































































































































































































































Search results

Summary of Contents for FrameSaver SLV 9664

Reviews:

Related manuals for FrameSaver SLV 9664

Brands by name

Popular brands

Paradyne FrameSaver SLV 9664, User Manual

Search results

Summary of Contents for FrameSaver SLV 9664

Reviews:

Related manuals for FrameSaver SLV 9664

Brands by name

Popular brands