Paradyne FrameSaver SLV 9664 User Manual Download Page 168

Page: 168 / 240

Setting Up NetScout Manager Plus for FrameSaver Devices

8-16

9664-A2-GB20-00

March 2000

Monitoring a DLCI’s History Data

Once the monitoring variables have been defined, a problem DLCI can
monitored.

Procedure

To monitor user history data:

1. From the NetScout Manager Plus main window, with the FrameRelay radio

button still selected, select the Traffic radio button.

The appropriate icons appear.

2. Highlight an agent in the agent list box so that its DLCIs appear in the DLCI

list box (under the agent list box).

3. Highlight the DLCI to be monitored.

4. Click on the Custom History icon. The NetScout Custom History window

opens.

Adjust the size of the window so the entire report can be viewed.

Summary of Contents for FrameSaver SLV 9664











































































































































































































































Search results

Summary of Contents for FrameSaver SLV 9664

Reviews:

Related manuals for FrameSaver SLV 9664

Brands by name

Popular brands

Paradyne FrameSaver SLV 9664, User Manual

Search results

Summary of Contents for FrameSaver SLV 9664

Reviews:

Related manuals for FrameSaver SLV 9664

Brands by name

Popular brands