VIII
the equipment. Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic water pipe system, if present,
are connected together.
This precaution may be particularly important in rural areas.
Caution: Users should not attempt to make such connections themselves, but should contact the
appropriate electric inspection authority, or electrician, as appropriate.
34. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
35. Administrative Regulations on Low Power Radio Waves Radiated Devices.
For any certified low-power RF devices, any company, firm, or user is not allowed to change the
frequency, increase the power, or change the characteristics and functions of the original design
without approval.
The use of low-power RF device shall not affect flight safety and interfere with legal
communication; if interference is found, it shall be immediately deactivated and improved until no
interference is required.
Legal communication in the preceding paragraph refers to radio communications operating in
accordance with the provisions of the Telecommunications Act.
Low-power RF device must withstand interference from legal communications or radiological
electrical equipment for industrial, scientific, and medical use.
36. The operations near the radar system shall not be influenced.
The directed antenna with high gain must apply to the fixed point-to-point system only.
37. Please keep this User Guide properly.
Summary of Contents for BM5100FDN Series
