PVIQ™ CONNECTIVITY SYSTEM USER MANUAL V 1.0
73
to click the Save button frequently during the procedure below.
The following steps are used to configure and enable daylight savings time on the
PViQ™ Connectivity System.
1. Open a supported web browser. Enter the IP address of the PViQ™ Connectivity
System that is being configured.
2. The Login Page will appear. Enter the appropriate username and password.
3. The Dashboard Page will appear. Select the
Network
tab.
4. The Network page will appear.
5. Click on the check box to enable daylight savings time change.
6. Select the start month from the
Start Month
pulldown menu.
7. Select the start week from the
Start Week
pulldown menu.
8. Select the start day from the
Start Day
pulldown menu.
9. Select the start time from the
Start Time
pulldown menu.
10. Select the end month from the
End Month
pulldown menu.
11. Select the end week from the
End Week
pulldown menu.
12. Select the end day from the
End Day
pulldown menu.
a. It is assumed that the end of daylight saving time will occur at the same
time during the day that is started.
13. Select the offset in time that daylight savings time will add to standard time, from
the
DST Time Offset
pulldown menu. There is a choice of
1 Hour
or
30
Minutes
.
14.
Click on the
Save
button in the
Actions
section to save your changes.
