PVIQ™ CONNECTIVITY SYSTEM USER MANUAL V 1.0
69
Section 6 – Configuring the PViQ™ Connectivity
System Through the Web UI
Introduction
This section provides the steps to configure the PViQ™ Connectivity System for normal
use through the PViQ™ Connectivity Web UI. This section provides the steps to:
•
Configure the PViQ™ Connectivity Panels with:
o
The Name of the Rack where each PViQ™ Connectivity Panel is located
o
The Rack Unit location in the rack where each PViQ™ Connectivity Panel
is located
o
The name of each PViQ™ Connectivity Panel
o
The mode of each PViQ™ Connectivity Panel
o
The application use of each PViQ™ Connectivity Panel
o
The mechanical shape of each PViQ™ Connectivity Panel
o
The shielding of each PViQ™ Connectivity Panel
•
Configure the PViQ™ Connectivity System for automatic change time for:
o
Daylight Saving Time
•
Configure the PViQ™ Connectivity System’s Network Settings for:
o
Boot Mode
o
Security
•
Configure the PViQ™ Connectivity System’s Network Time Protocol
Entering Panel Configuration Attributes
Identifying panels and locations with common terms helps the customer identify the
services that might be compromised and locate the alerting panels to reduce recovery
time.
Racks in the data center or enterprise closet are typically identified with a nomenclature
that make sense to the organization that is maintaining the systems. The PViQ™
Connectivity Web UI allows to user to use these organizational nomenclatures to