PVIQ™ CONNECTIVITY SYSTEM USER MANUAL V 1.0
49
Start Day
This is a user-selectable pulldown menu that allows the customer to select the day in
the week in which daylight savings time will start.
Start Time
This is a user-selectable pulldown menu that allows the customer to select the time of
day in which daylight savings time will start. There is a pulldown menu for hours and a
pulldown menu for minutes.
End Month
This is a user-selectable pulldown menu that allows the customer to select the month in
which daylight savings time will end.
End Week
This is a user-selectable pulldown menu that allows the customer to select the week in
the month in which daylight savings time will end.
End Day
This is a user-selectable pulldown menu that allows the customer to select the day in
the week in which daylight savings time will end.
DST Time Offset
This is a user-selectable pulldown menu that allows the customer to select the offset in
time (“1 Hour” or “30 Minutes”) that will happen when day light saving time starts and
ends.
Network Settings
This section contains the attributes about the network interface on the PViQ™
Connectivity System.
MAC
This is a read-only field that automatically updates with the Media Access Control
(MAC) address of the PViQ™ Connectivity Panel Module (PM). Each PViQ™
Connectivity PM will have a unique MAC address. This is the means of identifying each
PViQ™ Connectivity System.
Boot Mode Select
The
Boot Mode
select pulldown menu allows the user to enable the system to boot up
in Dynamic Host Configuration Protocol (DHCP) mode or in Static Mode. The PViQ™
Connectivity PM is shipped with this defaulted to DHCP. To make it easier to manage
TCP/IP settings, use DHCP. In DHCP mode, the PM will automatically acquire an IP