PVIQ™ CONNECTIVITY SYSTEM USER MANUAL V 1.0
104
The Enhanced I-Cord LED turns off.
Figure 70: PViQ™ Enhanced I-Cord during a Guided Add (switch end
correct connect)
On the PViQ™ Patch Panel, the Port LED to which the cable should be
connected begins flashing green.
Figure 71: Target Port during a Guided Add
4. Remove the Enhanced I-Cord from the PM Provisioning Port and connect it to
the target port on the PViQ™ Patch Panel. The MAC and MODE LEDs turn off.
Figure 72: PM IU when MAC is Complete
The MODE LED changes to green briefly, then the panel returns to Secure Mode
if the MAC is complete for this panel. The Target Port LED turns off.
