PVIQ™ CONNECTIVITY SYSTEM USER MANUAL V 1.0
91
a. The port LED and MAC LED will extinguish once the cord is removed from
the port.
b. The
Panel Mode
will change back to
Secure
mode.
c. The
Port Status
and
Patch Cord Type
will change to
Disconnected
.
8. The connection has been removed from the system and the system will be left in
secure mode.
Panel Learn Mode Method
This method may be used for patch field teardown or when removing individual patch
cords from a patch field. This method is typically used for patch field teardown.
Perform the following steps to remove Interconnect connections from a PViQ™
Connectivity System patch field.
1. Open a supported web browser. Enter the IP address of the PViQ™ Connectivity
System that the connection is being removed from.
2.
The Login Page will appear. Enter the appropriate username and password.
The
Dashboard
page will appear.
3. Select the
Network
tab. The
Network
page will appear.
4. Select the panel from the
Select a Panel
pulldown menu.
5. Select
Learn
in the
Configuration Mode
field from the pulldown menu.
6. Click on the
Save
button to change the panel to Learn mode.
a. The Mode LED on the panel with light amber.
b. All port LEDs with cross-connect cables will light green.
c. All ports LEDs with a copper interconnect will extinguish.
d. All ports LEDs with a fiber interconnect will light amber.
7. Remove the interconnect patch cord from the patch field.
a. When you remove the fiber interconnect cord from the PViQ™
Connectivity System, the LED above the port will extinguish.
NOTE: You may place all your panels into Learn mode before removing all of your
interconnect patch cords and the system will learn the connections as they are
removed.
