PVIQ™ CONNECTIVITY SYSTEM USER MANUAL V 1.0
136
quit
Ends the telnet session.
reset
Performs a Reset of the system. There are eight levels of reset available, as described
below:
reset system <1-8>
1 = reset the PM
2 = reset all the EMs
3 = reset the PM and all EMs
4 = obtain a new IP address from the DHCP Server
5 = clear the SNMP community string
6 = clear the database
7 = clear the file system. This is the same as the web UI “Default Settings…”
button.
8 = revert firmware to the version that the unit was shipped with and perform a
“reset system 7”.
CAUTION: Only qualified technicians should perform these resets. Level 6, 7 and 8
resets will cause the PViQ™ database to be cleared, losing all current configuration,
provisioning and patch field connectivity data.
set
Sets various parameters within the system, as shown below:
set email alert <email address> [always | daily | weekday | Saturday | Sunday]
Establishes rules for receiving email alerts.
NOTE: The web UI does not manage this setting. It defaults to “always” and can
only be adjusted from the CLI.
set email rate <email address> <emails-per-hour-per- event>
Sets the allowable number of emails per hour, per event for a given email
address.
set email trap [add | delete] <trap number>
Adds an email trap number (or set of trap numbers) to the database or deletes an
