PVIQ™ CONNECTIVITY SYSTEM USER MANUAL V 1.0
54
Time
This is a read-only field that is automatically updated with the time that the PViQ™
Connectivity System is set to. This field is formatted to 24 hour mode (hours:minutes:
seconds) and cannot be changed.
Actions
This section provides the buttons that are used to act on the PViQ™ Connectivity
System.
Save Button
If there are any changes made on this page, these changes will not be saved to the
system until the
Save
button is clicked. If another page is selected before the
Save
button is clicked, all changes made on this page will be lost.
NOTE: The Save button will save what is currently shown on the page. If you make
changes to a panel and then switch panels before clicking the Save button, you will lose
the changes on the previous panel. You must click the Save button before you select a
different panel on the Network Page.
Cancel Button
The
Cancel
button may be selected if it was decided that the changes made on this
page are not to be saved. The
Cancel
button may also be selected to refresh the page
(
NOTE: any changes made on this page after the last save will be lost
).
Restart Button
The
Restart
button will reboot the PViQ™ Connectivity System. When this button is
clicked, a popup window will appear to confirm that a restart is what was intended.
Figure 33: Restart Confirmation Popup Window
Default Settings Button
The
Default Setting
button will cause all attributes to be reset to factory default and
restart the PViQ™ Connectivity System, all of your customized data will be lost. When
this button is clicked, a popup window will appear to confirm that a reset to defaults is
what was intended.
