PVIQ™ CONNECTIVITY SYSTEM USER MANUAL V 1.0
43
on a panel. Note that the summary lines provide a summation of all the current alarms
on a panel. When no alarms are on a panel, the summary line does not appear.
Figure 30: Alarms Page (with five active alarms on the system)
Page Header
Below the ribbon is the page heading “Patch Cable Alarms”. Hover over the
Help
button
to see a description of the page. This description also appears in the “Context Help”
box.
Alarm Table
Below the page header is the alarm table. This table provides a per-panel summary line,
designated by a “*” in the port field, with the total number of Security Policy Violations
currently active in each panel. If there are none on a given panel then there will be no
summary line under that panel. Following the summary line under each panel is a list of
the current security violations, in port sequential order. Each security violation entry
provides the Panel
number
:
panel name
, Port
#
:
horizontal name
, MAC:
MAC
address of the panel PM
detected and a
description of the violation
! on the first line.
The second line in the entry provides the steps to take to repair the security violation.
Logs Page
From any page, click the
Logs
tab in the page ribbon at the upper left side of the page
to get to the Logs Page. The ribbon of tabs is the same at the top of all pages in the
PViQ™ Connectivity Web UI. This page provides a log of all alarms that have happened
in the PViQ™ Connectivity System. This is a first-in/first-out log that holds the last 128
