Settings and Printing
Network
Network
Maintenance and Spec.
Setup in NetWare
132
Perform the following steps:
Step 1: Setting up the printer
Step 2: Setting up the Server
Step 3: Setting up the client
There are two printing modes.
[A] Print server (PSERVER) mode
[B] Remote printer (RPRINTER) mode
Before setting up, select a printing mode. For detailed information on these modes, refer to the
NetWare manual or Novell web site. You may need to check with your network administrator which to
select.
Setting the NetWare server is almost performed on the client. You must log on the server using the
supervisor privilege. Novell Client software must be installed in your computer prior to setting up.
■
Step 1: Setting up the printer
When printing in Print Server mode, refer to procedures 1 to 12 of
“[A] Using NDS - PSERVER mode”
on page 112
in
“In NetWare 4.x / NetWare 5.x / NetWare 6”
. However, click on the
Bindery Mode
check box at step 10.
When printing in Remote Print mode, refer to procedures 1 to 12 of
“[B] Using NDS - RPRINTER
(NPRINTER) mode” on page 117
in
“In NetWare 4.x / NetWare 5.x / NetWare 6”
.
In NetWare 3.x