![background image](http://html2.mh-extra.com/html/panasonic/workio-dp-cl21/workio-dp-cl21_network-manual_3761601096.webp)
Settings and Printing
Network
Network
Maintenance and Spec.
Setup in Windows
96
[B] If the printer driver is already installed
Set up the printer port as follows:
1
Click
[Start]
, select
Settings
and then click
Printers
.
The Printers window is displayed.
• For Windows XP Professional, click
[Start]
, then click
Printers and Faxes
.
• For Windows XP Home, click
[Start]
, click
Control Panel
, click
Printers and Other Hardware
icon, then click
Printers and Faxes
icon.
2
Click your printer with the right mouse button.
3
Click
Properties
.
4
Click the
Ports
tab.
5
Click
[Add Port...]
.
6
Click
Standard TCP/IP Port
from the Available port types list, then click
[New
Port...]
.
The Add Standard TCP /IP Printer Port Wizard window is displayed.
7
Click
[Next >]
.
8
Enter the IP Address or host name of the printer in the
Printer Name or IP
Address
box, then click
[Next >]
.
9
If the designated printer is set not to use HP JetAdmin (
see page 162
),
click
[Next >]
.
10
Click
[Finish]
.
11
Click
[Close]
.
12
Click
[Close]
.
If you need to share the printer port for a client computer, refer to
“Sharing the printer port on the
server computer” on page 97
.
NOTE:
• Click on the
Start printing after last page is spooled
check button in the
Advanced
tab.
•
I
f the check box “
Use HP JetAdmin
” is enabled within the Network Setup Tool, then the Standard
TCP/IP Port setup is left in the original configuration using the “
RAW, port 9100
”. Only if the check box
is disabled in the Network Setup Tool utility, customization of the port will be required. (
see “LPR Port
Printing using TCP/IP in Windows 2000 or Windows XP” on page 99
).