![background image](http://html2.mh-extra.com/html/panasonic/workio-dp-cl21/workio-dp-cl21_network-manual_3761601108.webp)
Settings and Printing
Network
Network
Maintenance and Spec.
Setup in Macintosh
108
■
Using the Network Setup Tool
(Mac OS 8.1 - Mac OS 9.2)
If the administrator manages the IP Address, contact him/her to confirm the values before the
installation. If not, set the unique value that is not used by another devices on the network. Refer to the
example shown below.
Example
(assigning the IP Address, Subnet Mask and Default Gateway)
IP Address:
172.16.x.x
(x: you can choose any number from 0-255 except 0.0 and 255.255)
Be sure that the IP Address is not assigned to the other devices.
Subnet Mask:
255.255.0.0
It is the same value for all devices.
Default Gateway:
Not required. (0.0.0.0 or set to same as other devices on the network.)
NOTE:
• 0 should not be used at the initial value of IP Address. For example, if the IP Address is 5, enter the
number 5 (05 or 005 is incorrect). If there are any 0’s, 0 is OK, but 00 or 000 is incorrect.
First install the Network Setup Tool by using the printer CD-ROM disk and then set up
TCP/IP on the printer. If the Network Setup Tool is already installed, proceed to the step 8.
1
Insert the printer CD-ROM disk into the CD-ROM drive, and then double-click
the
DP-CL21M
icon, the
Mac OS
and
English
folder.
2
Double click the
DP-CL21M Installer
icon.
3
Click
[Continue]
if you agree with the software license agreement.
4
Click
Easy Install
and select
Custom Install
.
5
Click on the
Network Setup Tool
check box.
6
Click
[Install]
.
7
Click
[Quit]
.
8
Double click
Network Setup Tool
(it is located in Panasonic:DP-CL21M:Network Setup Tool folder).
DP-CL21M printers on the network will be displayed.