![background image](http://html2.mh-extra.com/html/panasonic/workio-dp-cl21/workio-dp-cl21_network-manual_3761601112.webp)
Settings and Printing
Network
Network
Maintenance and Spec.
Setup in NetWare
112
[A] Using NDS - PSERVER mode
The following are the steps for setting up the printer. First install the Network Setup Tool from the printer
CD-ROM disk and then set up the printer.
1
Start the server system.
2
Start the client system and log on the network in the NDS mode.
• If the Network Setup Tool is already installed, click
[Start]
, move the pointer to
Programs
,
Panasonic
and
Panasonic DP-CL21P
or
Panasonic DP-CL21M
, then click
Network Setup
Tool
. Proceed to step 7.
3
Insert the printer CD-ROM disk into the CD-ROM drive.
The CD-ROM launches automatically.
NOTE:
• If the CD-ROM does not launch automatically, perform the following steps.
(1) Double click
My computer
icon.
(2) Double click the CD-ROM icon.
4
Click
Custom Printer Setup
.
5
Click
Setup Printer in Network (Administrator)
.
6
Follow the instructions until the screen below is displayed.