![background image](http://html2.mh-extra.com/html/panasonic/workio-dp-cl21/workio-dp-cl21_network-manual_3761601010.webp)
Settings and Printing
Network
Network
Maintenance and Spec.
Setup in Windows
10
■
Step 2: Setting up TCP/IP on the printer
You need to set the IP Address, Subnet Mask and Default Gateway for the printer. It can be set by using
one of the following three methods. You may need to contact your network administrator to select the
best way to setup.
• Using the DHCP server (see below)
• Using the Network Setup Tool (see
page 11
)
• Using the Printer Panel (see
page 21
in "Settings and Printing")
NOTE:
• You can also setup the printer using BOOTP or RARP.
■
Using the DHCP server
If the administrator manages the network with DHCP server, it will automatically assign an IP Address,
Subnet Mask and Default Gateway. These can be viewed by printing out the configuration page on the
printer.
1
Press
MENU/EXIT (Pause)
button on the printer panel.
2
Press
!
(
CONTINUE
) button until
Test Page
menu appears.
3
Press
ENTER
button.
Menu Map menu appears.
4
Press
!
(
CONTINUE
) button until
Configuration Page
menu appears
5
Press
ENTER
button.
The configuration page will be printed.
6
Confirm the IP Address on the configuration page.
NOTE:
• If the printer receives the IP Address with unlimited lease term, the printer keeps the address
permanently. The printer saves the address statically and the DHCP function becomes disable
automatically.