![background image](http://html2.mh-extra.com/html/panasonic/workio-dp-cl21/workio-dp-cl21_network-manual_3761601164.webp)
Settings and Printing
Network
Network
Maintenance and Spec.
Appendix
164
■
NetWare
Name
Factory Default
Description
Use NetWare Protocol
ENABLE
Enables or disables NetWare printing.
Frame Type
802.2
Sets default Frame type used by DP-CL21P or
DP-CL21M. If DP-CL21P or DP-CL21M does
not work with the frame type, it will be
automatically changed to different type.
Printer Name
DPCLxxxxxx-Printer
Sets printer name registered to the NetWare
server. This name must be same as the printer
name registered to the NetWare server.
Operation Mode
PSERVER
Sets operation mode (PSERVER or
RPRINTER). If DP-CL21P or DP-CL21M does
not work with the current operation mode, it will
be automatically changed to different mode.
Print Server Name
DPCLxxxxxx
Sets a print server name for PSERVER mode.
Password
NULL
Sets a password to log on the file server.
Job Polling Time
4 seconds
Sets the interval to log on the file server.
Bindery Mode
ENABLE
Enables or disables Bindery mode.
File Server Name
NULL
You may set the name of the file server (up to 8
servers).
NDS Tree
NULL
Sets the NDS tree. Normally, DP-CL21P or
DP-CL21M will automatically detect the tree
name.
However, when there are several trees within
the network, you must set the name.
NDS Context
NULL
Sets the context used by NDS in the print server
name.
Print Server Name
NULL
You may set the print server name (up to 8
servers) to which the DP-CL21P or DP-CL21M
is connected.
Time Out
10 seconds
A time for DP-CL21P or DP-CL21M to recognize
the end of a job in remote printer mode.