Settings and Printing
Network
Network
Maintenance and Spec.
Setup in Windows
95
The following are the steps to print using the standard TCP/IP protocol in Windows 2000.
Step 1: Setting up TCP/IP on the computer
Step 2: Setting up TCP/IP on the printer
Step 3: Setting up the printer driver and the printer port on the computer
• When printing directly to a printer from a computer, on all Windows 2000 and Windows XP
perform the procedure in step 3.
• When printing through a computer functioning as a server, on all Windows 2000 and Windows XP
server computers perform the procedure in step 3, on all Windows 95, Windows 98, Windows Me,
Windows NT4.0, Windows 2000 and Windows XP client computers perform the procedure in step
4.
Step 4: Setting up the printer driver and the printer port on the client computer
■
Step 1: Setting up TCP/IP on the computer
First check that the TCP/IP protocol is installed on the computer.
Refer to
“Step 1: Setting up TCP/IP on the computer” on page 9
in
“LPR Port Printing using TCP/
IP in Windows 95 / Windows 98 / Windows Me”
.
■
Step 2: Setting up TCP/IP on the printer
Refer to
“Step 2: Setting up TCP/IP on the printer” on page 10
in
“LPR Port Printing using TCP/IP
in Windows 95 / Windows 98 / Windows Me”
.
■
Step 3: Setting up the printer driver and the printer port on the
computer
[A] If the printer driver is not installed
Refer to
“Step 4: Setting up the printer driver and the printer port on the computer” on page 76
for
“LPR Port Printing using TCP/IP in Windows NT 4.0”
Standard TCP/IP Port Printing in Windows 2000 or
Windows XP