![background image](http://html2.mh-extra.com/html/panasonic/workio-dp-cl21/workio-dp-cl21_network-manual_3761601144.webp)
Settings and Printing
Network
Network
Maintenance and Spec.
Setup in UNIX
144
FTP (File Transfer Protocol) is a protocol for transferring files installed on TCP/IP systems.
Perform the following steps.
1
Log on the printer.
# ftp PANA (or ftp 172.16.xxx.xxx)
Connected to PANA.
220 DP-CL21M Network Ver xxxx FTP server.
User(PANA:root): root
331 Password required.
Password:
230 User Logged in.
ftp>
2
Change the directory to remote print directory using “cd” command.
ftp>cd /lp
250 Command ok.
ftp>
3
Change transfer mode.
There are two transfer mode. The "ASCII mode" changes LF code to CR+LF code and the
"Binary mode" outputs the file contents as binary data.
Example: Change the transfer mode to Binary mode and display current mode.
ftp>type binary
200 Type set to I.
ftp>type
Using binary mode to transfer files.
ftp>
4
Use put command to send print data to the printer.
Example: Transfer print data "test.prn".
ftp>put test.prn
5
Log out.
ftp>quit
Printing using FTP