Settings and Printing
Network
Network
Maintenance and Spec.
Setup in NetWare
126
[For RPRINTER on IPX]
When printing in NDPS - Novell Gateway mode, refer to procedures 1 to 12 of
“[B] Using NDS -
RPRINTER (NPRINTER) mode” on page 117
.
The following are the steps to set up the server.
1
Start the server system.
2
Start the client system and log on the network in the NDS mode.
3
Double click
nwadmn32.EXE
to display the
NetWare Administrator
window.
4
With the container object highlighted, click
Create...
from the
Object
menu.
The New Object window is displayed.
5
Select
NDPS Printer
from the
Class of new object
box, then click
[OK]
.
The Create NDPS Printer window is displayed.
6
Enter a printer name
(
for example:
DP-CL21M
) in the
NDPS Printer Name
box,
click on the
Create a New Printer Agent
check button and click
[Create]
.
The Create Printer Agent window is displayed.
7
Click on
[…]
to the right of the
NDPS Manager Name
box; highlight the NDPS
Manager object in the left window, and then click
[OK]
.
8
Make sure that
Novell Printer Gateway
is selected within the
Gateway Types
window, and then click
[OK]
.
9
Enter the Printer Name (default:
DPCLXXXXXX-Printer)
in the
Printer Agent
[PA] Name
box, and click
[OK]
.
The Configure Novell PDS for Printer Agent window is displayed.
• XXXXXX indicates the last 3 bytes of MAC Address of the printer network interface. You can
obtain the number (hexadecimal six digits) from the label near the network interface connector
or by printing a configuration page (
see “Using the DHCP server” on page 10
).
10
Select
[NONE]
from the
Printer Type
box,
Novell Port Handler
from the
Port
Handler Type
box, and then click
[OK]
.
The Configure Port Handler for Printer Agent window is displayed.
11
Click on
Remote [rprinter on IPX]
check button from the
Connection Type
,
Other
check button from the
Port Type
, and then click
[Next>]
.
The Configure Port Handler for Printer Agent window is displayed.
12
Enter a SAP name (for example:
DPCL21MSAP
) in the
SAP Name
box.
