![background image](http://html2.mh-extra.com/html/panasonic/workio-dp-cl21/workio-dp-cl21_network-manual_3761601159.webp)
Settings and Printing
Network
Network
Maintenance and Spec.
Appendix
159
Unable to connect to NetWare Server in Print Server mode.
• Check the frame type is set correctly.
• DP-CL21P or DP-CL21M can switch to PSERVER and RPRINTER modes automatically, but it may
take extra time depending on the environment.
• If file server is defined to the DP-CL21P or DP-CL21M, check the file server name is correct.
• Ensure the printer port name is correct, then make sure the same port name is assigned to the
DP-CL21P or DP-CL21M and NetWare server. If there are more than one DP-CL21P or DP-CL21M
on the network, ensure the assigned port name is unique.
• Check the same NetWare login password is set to the DP-CL21P or DP-CL21M and the file server.
• Check the machine name and print server name are the same.
Unable to Print.
• Check that the DP-CL21P or DP-CL21M is connected to the network correctly.
■
Trouble in Macintosh Environment
Unable to detect DP-CL21M.
• Check that the DP-CL21M is connected to the network correctly.
• If the DP-CL21M is on the assigned zone, make sure the zone name is selected from "Chooser" .
• Make sure the correct printer driver is loaded.
• Ensure that AppleTalk is checked and is available from the Chooser.
• Check in the AppleTalk control panel that the correct environment being used.
NOTE:
• Print out a Configuration page to ensure the AppleTalk protocol is ENABLED.
• Print out the Configuration page to ensure that an AppleTalk Printer name is assigned.
Shows "Not enough Memory" and unable to print.
• Application memory may not be enough. Click the application icon, select Information from file menu,
and increase memory size.
• Close any other running applications.
• Increase the available space of the hard disk drive of your computer, by defragging.