Panasonic LP-M Series, Maintenance Manual

Page: 42 / 174

42
2-2-2 Controller
„
Front
5
9
4
3
2
10
8
1
6
7
10
2
8
1
6
7
5
9
4
3
LP-M200/M205/M500/M505 LP-MA00/MA05/MA06
1. Key switch: POWER
This key switch is used to start the laser marker system.
Turn ON (|) the switch to start-up the system, and turn OFF (O) the switch to shutdown
the system.
Only when the key switch is turned OFF (in O position), the key can be pulled out.
When the laser marker is not in use, the key should be in safekeeping by a laser safety
manager.
In case of turning ON the power supply after turning OFF, leave the interval five seconds or more between ON and
OFF.
Do not turn off the power supply while the system starts (during MAIN indicator is flashing).
2. Controller display panel
The indicator that shows the status of laser radiation and the laser
marker.
No. Display name Status Indication
q
FILE No. / ERROR CODE Normal state Displays selected file No.
Alarm or warning status Displays error code No. Refer to
“Error Indication” (P.161).
w
MAIN System is powered on Green lighted-up
System under starting up
(uncompleted)
Green flashing
e
MARKING Being in laser emitting Orange lighted-up
ヱヰヸユ
ン
ON
OFF
w
e
q
ME-LPM-SSM-10