Panasonic LP-M Series, Maintenance Manual

Page: 60 / 174

60
4.
Connect the three wires to the terminals.
The signs of “L (black)”, “N (white)” and “PE (yellow/green)” show in the cables.
Connect each cable to the appropriate terminal.
Screw size: M4
Tightening torque: 1.2N·m to 1.8N·m
ワㄐㄕㄊ㄄ㄆ
• For the AC power supply cable, use the attached AC power cable or a cable with
the enough rating capacity to fulfil the power voltage specification of this product.
• Select the AC power cable compliant with the standards in the country or region
where it is used.
5.
Attach the resin cover to the terminal and screw the terminal
casing.
Screw size: M3
Tightening torque: 0.5N·m
6.
Fix the AC power cable with the clamp.
Screw size: M4
Tightening torque: 1.0N·m
ワㄐㄕㄊ㄄ㄆ
• Locate the AC power cable beside the fan. Locating it in front of the fan
may impair the air-cooling performance, leading to the device failure.
7.
Make sure that the cables and connectors other than the power supply are connected and then
connect the AC power cable to the AC power supply.
Power voltage: 90 V to 132 V AC or 180 V to 264 V AC (including ± 10% voltage fluctuations; automatic switching)
ワㄐㄕㄊ㄄ㄆ
• Be sure to connect the ground pin of the AC power cable to earth permanently.
• Set each connecting cable away from the device that generates high voltage, power line, and large switching surge as
far as possible. If any noise is occurred on the power source, use the noise cut-off transducer.
/
1
3(
L N
ME-LPM-SSM-10